Waterproof Burial Splice for 14-Gauge Wire Underground Dog Fence Wiring
2 Pack 14-Gauge Waterproof Splices
Why do I need a different splice for 14-Guage Wire? 14-Guage Underground Dog Fence Wire is much thinker than other gauge wire.
Before you begin splicing wire, it will be helpful to you to take note the locations of all splices for future reference. If you ever have a wire break, the problem is most often happen at one of the underground dog fence splice locations. It will be helpful to you to be able to find your splices easily if this ever happens.
How To make a splice for Underground Dog Fence Systems?
Strip approximately 3/8 inch of insulation off the ends of the boundary wires to be spliced. Make sure the copper of the wire is not corroded. If the boundary wire is corroded, cut it back to expose clean copper wire.
Insert the stripped ends into the wire nut and twist the wire nut around the wires. Ensure that there is no copper exposed beyond the end of the wire nut. Tie a knot 3 to 4 inches from the wire nut. Ensure that the wire nut is secure on the wire splice.
Once you have securely spliced the wires together, open the lid of the gel-filled splice capsule and insert the wire nut as deeply as possible into the waterproof gel inside the capsule.
Snap the lid of the capsule shut.
Note: If your splice pulls loose, the system will not function. Make sure your splice is secure.
|Waterproof Burial Splice for 14-Gauge Wire Underground Dog Fence Wiring 2-PACK