PIF-300 PetSafe Wireless Dog Fence Specs:

• 6 adjustable levels of correction
• New beep only training mode
• Use with a unlimited number of pets by adding a petsafe wireless fence dog collar for each pet
• Containment area can be increased to any size with additional transmitters
• PetSafe Wireless Dog Fence Safety features:
  • Protection against false signals. Only our transmitter can activate the receiver.
  • Receiver Fail-Safe. If your pet leaves the correction zone, the receiver will shut down after 25 seconds to prevent over correction
  • In case of a Power Outage the System Turns Off the Collar
• Waterproof Collar - Petsafe wireless dog collar will fit dog neck size: 6" - 27" 
• Low battery indicator light
• Lightweight 2.5 ounce receiver 2 1/4"W x 1 5/8" D x 1" H

How does the PetSafe Wireless Dog Fence work?

The PIF-300 PetSafe Instant Dog Fence is a revolutionary concept that provides the safest, simplest form of pet containment ever. Plug in the transmitter some where inconspicuously in your home. The transmitter emits a 17.5kHz radio signal around your home. Your dog wears a lightweight receiver collar which "listens" for the signal. While the dog collar is receiving the signal, your dog is free to run and play in your yard. When he approaches the boundary of the signal area, he receives a warning beep. If your dog does not return, he receives a static correction which is startling but not harmful. With a little simple training, your dog will quickly learn his boundaries.

Setting up your PetSafe Wireless Dog Fence takes only a few minutes. The transmitter plugs into any standard 110 volt outlet. Since the signal will transmit reliably through walls and other obstructions, it can be placed in any convenient and discreet location, typically in the garage or a closet. Once you have set up The PetSafe Instant Fence, you can now adjust the range that is appropriate for your dog and your yard.

Training your dog is quick and easy, just follow the training instructions included with your PetSafe Wireless Fence. Once you have adjusted the signal to the perimeter you want, mark the boundary by placing the training flags at the edge of the signal. Every PetSafe Instant Fence comes with the petsafe wireless fence transmitter, one receiver, 50 boundary flags for training your pet and a manual that explains installation and training. You can contain an unlimited number of pets on the PetSafe Wireless Dog Fence by purchasing additional receivers.

Increase Your Instant Dog Fence Coverage with Additional Transmitters

The signal field can be adjusted anywhere from a 30 to 180 foot diameter (1/2 acre) from the transmitter. The shape of the signal is in a perfect circle and the shape cannot be changed. The range of The PetSafe Wireless Fence can be increased by using two or more transmitters.  This creates multiple intersecting circles, two transmitters would create a boundary in a shape similar to the MasterCard™ logo. The signal is cancelled where the circles intersect, allowing the pet access to the entire area. The transmitters can be located a maximum of 150 feet apart and each transmitter must be out of the weather, they cannot get wet. An additional petsafe wireless fence transmitter would create a boundary that is up to 180 feet wide and up to 330 feet long.  A maximum of 3 transmitters can be used together for an approximate coverage area of 1 1/2 acres.