LV-9000 Snap-Lock Splices Bag of 24 for Underground Dog Fence Containment Systems

Superior Performance when it counts Snap-Lock Splice connectors eliminate common install problems:

Locking - Never loosens or dangles off wires
Foolproof - Never fails to grab the wires
Easy - Compact 5-second installation
No Mess - Silicone encapsulates connection and will not melt out
No Tunneling Effect - No channel for moisture to follow into the connection
Vibration Proof - Connection stays secure
Locks Tight with Double O-Ring Seals

Just squeeze and lock to hydraulically pump and pack waterproofing silicone. Pre-filled silicone fully encapsulates all bare wires, closing all entryways against moisture and corrosion. A double O-ring seal bars water from creeping in, and latches lock the connector around the wires. Blazing Wire Connectors™ are vibration-proof and never dangle off the wires.

Say Goodbye to Traditional Connector Problems- Eliminate Expensive Call-Backs Because of Faulty Wiring

Professionals generally check the wiring first when examining a faulty pet containment system because traditional connectors regularly fail to maintain the connection and protect it from moisture and corrosion. Blazing Wire Connectors™ are the solution - They're the economical connectors that make the connection first and seal it second.

Snap-Lock Splices Wire Connectors™ Installation Instructions

(Formerly known as SNAPLOC™ Low-Voltage Wire Connectors.)

1. Strip wires 3/4" and group bare wire ends together. No pre-twisting necessary with solid wire. Pre-twist stranded wire. If using both wire types, wrap stranded wire around solid wires (see illustration 1A).
2. Insert wires through flexible sealing fingers and bend wires into either "V-Channel".
3. Push inner sleeve into pre-filled outer sleeve until double-locked.
4. Pre-filled silicone fully waterproofs the connection. Do not reuse connector.