Stainless Steel Metal Dog Crate Pan for Midwest 10PAN Cages

10PAN_SS Stainless Steel Metal Dog Crate Pan Trays Overview:

• metal dog crate trays pans are heavy stainless steel
• Metal Dog Crate Pan has squared sides
• Top edge of the Dog Crate Tray is hemmed with no sharp edges
  
• Metal Dog Crate Pan has squared corners
• This is a stocked item but due to demand sometimes the crate pan inventory gets depleted and it could take up to 3 ADDITIONAL WEEKS! 

Stainless Steel Metal Dog Crate Pan for Midwest 10PAN Cage Size:

• 46-7/8 x 29-1/8 x 1

Stainless Steel Metal Dog Crate will fit the following Midwest Dog Crates:

• Midwest Folding 1248, 1348TD, 1548, 1548DD, 1648, 1648DD, 1648UL, 1748/DT/CC2/DD2, 1948, 510, 610, 710BK, 748UP, ACE-448, ACE-448DD (48x30)
• May fit other dog crates too. See Measuring instructions below.
  

Stainless Steel Metal Dog Crate Pan for Midwest 10PAN Cage Color:

• Stainless Steel Silver
  

Measuring for a Stainless Steel Metal Dog Crate Pan:

• If you don't know the model of the dog crate and have an existing dog crate tray - measure the dog crate pan length and width from edge to edge.
  
• So you don't have an existing dog crate tray to measure. Measure the width of the opening where the dog crate tray slides into the bottom front of the dog crate. This is the width.  Allow about 1/4-inch for the pan to slide into the crate smoothly (ex: if the opening is 24-1/2-inch then 24-1/4-inch should be good).  Next, measure the maximum length the dog crate pan can be when the dog crate pan slides into the dog crate. Remember to look for any obstructions (wire or dog crate pins) when measuring the length and make sure the dog crate pan door can be closed. This is the Length.  Most pans are 1-inch deep but some crates do allow for a deeper pan.  Measure the height of the opening where the pan slides into the dog crate allowing enough room for the pan to slide into the crate smoothly.